Accessories

Finding the perfect gift can be tough. Which is exactly why we offer gift cards. They are also a fantastic way to thank someone special. They're always the right size and color, too. HOW TO: We can mail the card to you or the intended recipient. During checkout just enter the appropriate address in the "Ship To" field. If we are sending it directly to someone as a gift, add the name of the recipient, or a short message (up to four words), in the "Comment" field. You can also, add the name of the gift card giver to the "Comment" field. Otherwise, we will leave it blank. Gift cards are for in-store redemption only. If you would like a custom amount just give us a call - 802-387-5718 - Monday through Saturday from 10-6.

We worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X LITE Bicycle Chain Lubricant Like our Regular chain lube, cyclists who tested or raced using PRO X Lite, report it to perform better then any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X Lite brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little is used to move your bike parts. - 10 time high lubricity the Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, last longer, runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X LITE is the lighter version to our PRO X REGULAR chain lubricant. PRO X LITE is ideal for a road bike, wet or dry, and extreme dry off-road trail conditions or over cyclist you are prone to over applying. PRO X LITE can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in extreme cold conditions.

Dumonde Tech worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X REGULAR Bicycle Chain Lubricant Everyone who has tested or raced using PRO X reports that performance is better than any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X REGULAR brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little effort is used to move your bike parts. - 10 times higher lubricity than Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, lasts longer, and runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X REGULAR is the heavier version to our PRO X LITE chain lubricant. PRO X REGULAR is ideal for Mountain Bike, Cyclocross, and all extreme condition, while maintaining a clean drive train. PRO X REGULAR can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, used sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions.

Our Classic LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. "Riding in" forms an extremely low-friction plating. Plating bonds to chain; can't be washed off! Components stay cleaner, last longer, and run quieter. Extremely durable and outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech's Bicycle Chain Lubes on all cables, pivots points, and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in extreme cold conditions.

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use. • #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33 • #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939") • #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud) • Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes • Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes • Long travel cam handle allows quick entry, adjustment and exit • Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts. • Durable, replaceable jaw covers • Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts • Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments

The CRS-15.2 uses two different insert rings to install bearing races on the 1.5-inch and 1-1/4-inch forks. The bearing surface is spared a direct hit by using aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm. - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.

The New U, the U-Lock redesign from Kryptonite, features expanded double-deadbolt security, anti-rotation capability, and a fresh new design, all making life quite a bit harder for the bike thieves of the world. Specifications and Features: - Security rating: 8/10 - 14mm hardened MAX-PERFORMANCE STEEL SHACKLE - 3 STAINLESS STEEL KEYS — including new key design and one LED REPLACEABLE KEY FOB - Patent-pending HARDENED DOUBLE DEADBOLT design gives additional protection against twist attacks - NEW SMALLER CROSSBAR DESIGN - HIGHER SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 11.5” (10.2cm x 29.2cm) - Product weight: 3.85 lbs (1.75 kgs)

Meet the one-two combo that keeps you seen day and night! Featuring Blackburn's brightest front and rear lights, the Dayblazer 1100 front and Dayblazer 65 rear light set features eye-catching BLITZ Daytime Running Mode and all the mounting versatility you could ever need. Bright enough to help keep you seen during the day, and also great for hitting the streets at night. DAYBLAZER 1100 Front Light - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 5 hour recharge time - Dual Beam Pattern - LED Charge Indicator - Runtime: High 1.5hrs (1100 lumen), Medium 2hrs (800 lumen), Low 3 hrs (400 lumen) - Runtime: Pulse/Strobe: 7hrs (200 lumen)/12 hrs (200 lumen) - 140g DAYBLAZER 65 Rear Light - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - TIR Lenses - LED Fuel Gauge/Charge Indicator - Polycarbonite Construction - 2 hour recharge time - Runtime: Solid 1.5hrs (50 lumen), Pulse/Strobe 3hrs (65 lumen) - 48g

3/8" drive Zyklop bit sockets. - 9-piece bit-socket set on a robust textile belt, 3/8 - Bit-sockets with all the advantages of the Wera bit technology - Bit-sockets with holding function for screws/bolts - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System - 1x Belt B 3 TORX HF Zyklop bit socket set with holding function, 3/8" drive, 9 pieces - 9x 8767 B HF TORX: TX 10x35.0, TX 15x35.0, TX 20x35.0, TX 25x35.0, TX 27x35.0, TX 30x35.0, TX 40x35.0, TX 45x38.5, TX 50x38.5 - 1x Socket rail B (textile belt), 9 location, unloaded, 45 x 310 mm - 1x Hook-and-Loop Fastener Strips 30, 200 x 30 mm

The Ultimate Tire Lever. The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts. Especially the critical step of dropping the bead into the rim channel. Rubberized ergonomic handle – the most comfortable tire lever you’ll ever use Unique “thumb flange” makes it easy to apply pressure to the tire bead Sturdy, durable plastic lever – strong enough for DH tires, yet won’t scratch your rims

Your spacious one-click shopping bag: the Bike-Shopper with QL2.1 system can be quickly attached to and removed from your rack. The flexible market and shopping bag remains stable – even on bumpy roads. The adjustable carrying straps allow it to be carried comfortably on your shoulder (adjusted by push buttons) and will not be in the way during biking. A waterproof Quick-Seal closure provides protection from the rain. Occasional use of ORTLIEB lubricant will keep the closure running smoothly. Further Features: - Internal valuables pocket in size DIN A4 - Padded carrying handle - Lateral 3M-Scotchlite reflectors Advice: Temperatures below -5°C/23°F may affect the function of the sealing lip!

Reach for the Talon 11 when the day's agenda calls for a mountain bike ride, day hike, summit scramble, or all of the above. This versatile panel-loading pack features a hydration reservoir sleeve, breathable, close-to-body AirScape backpanel and continuous-wrap harness and hipbelt that moves with you. Mounting options for an ice axe, trekking poles, a bike helmet and blinky light make this pack ready for whatever adventures you can dream up. Constructed with high-quality bluesign-approved recycled high-tenacity nylon and a PFC-free DWR coating. Airscape Suspension An injection-molded, die-cut foam AirScape backpanel creates a breathable, close-to-body fit. A flexible BioStretch harness and hipbelt, with a continuous lumbar-to-hipbelt wrap, allow for dynamic movement. Light and Fast A lightweight pack series designed with optimal stability for dynamic movement even on the most technical terrain. Multi-Sport From top-loaders to lumbar packs and everything in between, the Talon/Tempest Series accommodates the needs of hikers, bikers and more. Sustainable Materials Constructed with high-quality bluesign-approved recycled high-tenacity nylon. - Dual-zippered panel access to main compartment - Internal zippered mesh pocket with key clip - Tuck-away ice ax attachment with bungee tie-off - Stow-on-the-Go trekking pole attachment - Top panel zippered slash pocket - LidLock bike helmet attachment - Lower side compression straps - Side stretch mesh pockets - External hydration reservoir sleeve - Easy-access, expandable stretch mesh harness pocket - Dual-zippered fabric hipbelt pockets - Blinker light attachment (light not included) - Large stretch mesh front panel pocket - Adjustable bungee front panel storage Airscape Backpanel - Injection-molded AirScape framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use - Mesh-covered foam lumbar for lightweight and comfortable contact surfaces BioStretch Harness - Integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Harness system easily adjusts to fit various torso lengths - Adjustable sternum strap with safety whistle buckle BioStretch Hipbelt - Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Crossbody ErgoPull hipbelt system to pull lumbar into body

If your day calls for a mountain bike ride, day hike or summit scramble, the women's-specific Tempest 9 is the perfect companion. Featuring a hydration reservoir sleeve, breathable, close-to-body AirScape backpanel and continuous-wrap harness and hipbelt that moves with you. Ready for any and all adventure with ice axe, trekking pole, bike helmet and blinky light mounting options. Constructed with high-quality bluesign-approved recycled high-tenacity nylon with a PFC-free DWR coating. Airscape Suspension An injection-molded, die-cut foam AirScape backpanel creates a breathable, close-to-body fit. A flexible BioStretch harness and hipbelt, with a continuous lumbar-to-hipbelt wrap, allow for dynamic movement. Light and Fast A lightweight pack series designed with optimal stability for dynamic movement even on the most technical terrain. Multi-Sport From top-loaders to lumbar packs and everything in between, the Talon/Tempest Series accommodates the needs of hikers, bikers and more. Sustainable Materials Constructed with high-quality bluesign-approved recycled high-tenacity nylon. - Dual-zippered panel access to main compartment - Internal zippered mesh pocket with key clip - Tuck-away ice ax attachment with bungee tie-off - Stow-on-the-Go trekking pole attachment - Top panel zippered slash pocket - LidLock bike helmet attachment - Lower side compression straps - Side stretch mesh pockets - External hydration reservoir sleeve - Easy-access, expandable stretch mesh harness pocket - Dual-zippered fabric hipbelt pockets - Blinker light attachment (light not included) - Large stretch mesh front panel pocket - Adjustable bungee front panel storage Airscape Backpanel - Injection-molded AirScape framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use - Mesh-covered foam lumbar for lightweight and comfortable contact surfaces Biostretch Harness - Integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Harness system easily adjusts to fit various torso lengths - Adjustable sternum strap with safety whistle buckle Biostretch Hipbelt - Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Crossbody ErgoPull hipbelt system to pull lumbar into body

The PDW Gear Belly is a super-stable and easily accessible way to carry gear up front. The sturdy handlebar mounting bracket is designed and manufactured in Germany by Rixen & Kaul and is compatible with 22.0 – 31.8mm straight, riser or flared drop handlebars. Two interior straps hold gear into place. Three exterior straps cinch the Gear Belly nice and tight. All buckles feature cam locks to insure that cargo is extra-secure. A double ended waterproof dry bag is included with every Gear Belly and makes for the perfect fit. Exterior daisy chains create space for last-minute attachments. The sturdy and flexible exterior of the Gear Belly is finished with an easy-to-clean black tarpaulin, so go on and head into the muddiest of adventures! Rated for up to 7kg/15lbs of cargo. - Waterproof roll top drybag straps to handlebar harness - Fits 22.0 – 31.8mm handlebars - Opening at both ends for easier gear access - Durable and abrasion-resistant tarpaulin exterior - Daisy chain for last minute attachments - 15lb load limit

Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Tailwind aerodynamic panniers blend form with function, reducing drag and battery consumption by up to 6% when tested against competitors. Their low-bulk, clean-lined design delivers increased stability with a sleek aesthetic, creating a modern storage solution that lets you go further, faster, without compromising on what you carry. - 17 L capacity for all your gear, whether you're going downtown or way out of town. - Approx. dimensions (mm): 400 x 330 x 142mm (height/width/depth). - Klickfix mounting system lets you load the bags on and off your bike quickly for easy transitions, freeing up the top of the rack for additional carrying. - Compatible with all standard racks and all racks on Specialized bikes. - Sleek, water-resistant design sheds rain so your stuff stays dry when the weather gets nasty. - Unique right- and left-sided design delivers optimal aerodynamics for increased efficiency. - Internal laptop sleeve carries your computer snug and safe (laptops up to 17" screen). - 360-degree reflective graphics help drivers see you coming. - Freestanding shape for accessible loading and unloading.

Take your ride up a notch with the Front Rack and Adventure Plate combo. These Specialized e-bike accessories give you an extra carrying platform to carry up to 10kg on the front end of your Turbo Vado, Como, or Tero. The front rack system for the bike was designed thoughtfully for elegant integration at the front of your bike, and it features meaningful compatibility for carrying what you want, how you want to. - Compatible with Turbo Vado, Como, and Tero. - Mounts to compatible bikes via the headtube interface. - Optional MIK compatibility when the plate is removed. - Seamless integration of front light mount. - Max. Load 10kg. - Retailer installation is recommended.

Designed to fit the Surly 24-Pack Rack, Surly's updated Porteur House Bag features a versatile strap system that gets along with a variety of Porteur-style racks. Simple to install and remove, it's been tweaked to be even better for commuting and light weekend camping. With a structured body to stabilize your cargo, an integrated nylon liner, a handy roll top for accommodating bulky items, and more pockets than your old cargo pants, the Porteur House Bag makes unwieldy loads decidedly wieldier. - Includes two One-Wrap straps and one accessory bungee for securing loads of different shapes and sizes - One large main compartment, two front pockets, and two additional pockets on both sides of bag - 30-lb. bag capacity. Consult your rack's weight limitations - Dimensions when Rolled: 370 x 280 x 240mm - Dimensions when Unrolled: 370 x 280 x 440mm - Main body 1680D nylon, Liner 400D nylon. Bag fabric and hardware are bluesign Approved, which means the materials are sustainably produced to have the lowest possible impact on people and the environment - 18L volume Specifications: - Number of Compartments: 7 - Access Style: Roll Top - Primary Material: 1680D Nylon with polyurethane coating - Waterproof: No

GRANIT™ PLUS 470 MAXIMUM PROTECTION AGAINST A WIDE VARIETY OF BIKE THEFT TECHNIQUES Stop thieves in their tracks: the GRANIT™ Plus 470 U-Lock offers superb protection against attempts to remove the lock by hitting or pulling. Do you need to leave your high-value bicycle in locations such as railway stations where the risk of theft is high? Then the GRANIT™ Plus 470 U-Lock is your ideal companion: the ABUS Power Cell technology offers superlative protection against attempts to remove the lock by hitting or pulling. The shackle, the body and the load-bearing parts of the locking mechanism are manufactured from specially hardened steel. It also features the picking-resistant Plus disc cylinder. This combination has earned the GRANIT™ Plus 470 acclaim in a wide variety of tests, with seals of approval from OSIMZ (Russia) and test institutes in Finland, Sweden, Denmark, Norway and the United Kingdom. - Hardened 15/32" parabolic shackle - ABUS Power Cell technology provides outstanding protection against attempts to remove the lock by hitting or pulling - The shackle, the body and the load-bearing parts of the locking mechanism are manufactured from specially hardened steel - Automatic cover to protect the keyhole from contamination and corrosion

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

This messenger style bag is elevated with modern features tuned to a professional’s needs for cycling and a full workday. From the morning commute to airline travel, this everyday carry keeps necessities well-organized and within reach. The shoulder sling keeps it at your side, or utilize the Travoy trailer's upper deck connection for a bike cargo trailer experience. Features: - Multiple tech compartments including a padded laptop sleeve (up to 15.6") and tablet sleeve for safe and secure storage - Water-resistant fabric with a tarpaulin bottom for additional protection - Suitcase handle sleeve for securing to rolling luggage - Fleece-lined front pocket for smaller valuables - Stowable bag clips (4) for Travoy bike trailer connection - Exterior slip pockets readily accessible for quick stops - Breathable back panel - Internal organization pockets keep everything in its place - Utility clip for keys - Quick-release buckles secure messenger flap - Removable shoulder sling tucks away when not in use - Cross-body strap keeps the bag centered on the back when riding - Light loop for accessory lighting - Compatibility: 2010 – Current Travoy Specifications: - Volume (Liters): 12 - Weight (lbs/kg): 1.7 / 0.77

The E-Bike Orbis StVZO E600 is an advanced StVZO certified e-bike cycling front light delivering 600 lumens of output. This light is housed in a die-cast and CNC-Machined Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. The Orbis StVZO E600 offers Daytime Running Light mode as well as an intelligent 'Thermal Protection Safety Feature' which automatically reduces light output for safety and efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and CNC Machined Aluminum E-bike Mega Mount are included. E-Bike compatibility: 10.5 – 13.5V input, 8.5W Low Beam / 13W Daytime Running Lights. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 600 lumens - StVZO-Optimized lens - Daytime running lights (ECE R87) - Die cast and CNC-machined aluminum body with optimized heat-dissipating design - Includes CNC Machined Aluminum E-bike Mega Mount - Thermal Protection Safety Feature: Auto-reduces light output for safety and efficiency - Rigorously tested to IPX7 Waterproofing standards - E-bike compatible 10.5 – 13.5V input, 8.5W LB / 13W DRL - Versatile E-bike system compatibility - 130cm power cable with BES3 BOSCH connector included

- Rugged 6061 aluminum construction is corrosion resistant - 100mm mudflaps provide ultimate coverage and are double-riveted for durability - Hardware is all stainless-steel and pre-installed for hassle-free mounting - V-stays for added stability - Disc brake compatible - 50mm width - Release Tabs on front fender for added safety - Meets EN test standards

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm