29-Inch

Aggressive, premier and unwavering...those were words we used to describe the highly esteemed Vigilante 2.3, and they still ring true for these wider brethren. We simply dreamt of ripping trails on wider versions of our favorite aggressive mountain tire. We wouldn't hand you spineless claims about vast improvements unless they were true. The new Vigilante has received a substantial increase in both the height and surface area of the side knobs. Tall, stout outer knobs not only dig deeper, but also start digging sooner in the initial stages of cornering. Wider, taller, and more aggressive in every way: the new Vigilante. TriTec And Slash Guard: All Vigilante tires feature TriTec Compound, which utilizes three rubber compounds to provide different levels of traction, support, and durability based on their placement within the tread. The entire tread pattern is supported by a base of high-durometer rubber, which also transitions halfway into the height of the knobs and allows for the use of softer knob compounds without the tire folding under cornering forces. The top of the center knobs consist of a medium-durometer compound to provide traction and durability without sacrificing rolling efficiency, while the outer knobs feature the softest compound to deliver maximum grip and slow rebound. All TCS Light versions of the new WTB tires feature Slash Guard technology, which incorporates a protective nylon insert spanning the entire sidewall to provide extra protection without the weight of a dual-ply TCS Tough casing. - Square-lugged knobs deliver unwavering traction, yet benefit from added height to ensure they dig even deeper into loose, unpredictable terrain. - Updated siping arrangement places emphasis on cornering forces, while the larger knobs don't discriminate against shamelessly forceful cornering or reckless braking. - Increased circumferential spacing allows the tread to remain clear in sloppy conditions, while still keeping the casing protected from spiteful rocks. - Vigilante is optimized for use with i29 rims.

Designed with the unknown in mind, the Rutland takes the guess work out of selecting the right tire for the ride. Ramped, tightly spaced center lugs reduce rolling resistance while larger, more spaced-out shoulder and transition lugs provide grip in loose conditions. - Designed and inspired by experiences riding and racing rolling coarse-gravel routes - Tubeless ready for flat prevention, lower-pressure traction and comfort - Ideal internal rim width is 23mm HOW IT WORKS - Center lugs are large and widely spaced for braking and acceleration grip, and ramped to lower rolling resistance. - Transition lugs are spaced out to shed mud; siping conforms to the road surface for increased traction in corners. - Side lugs are staggered to provide traction in more aggressive turns and on loose surfaces.

The Butcher GRID GRAVITY 2Bliss Ready T9 is the perfect choice for trail and gravity riders. Ramped and siped center tread blocks provide strong traction and accurate steering, while the shoulder knobs offer a continuous biting edge for railing through fast corners. The GRID GRAVITY casing compliments gravity riding with an all-new 2-ply construction for cornering stability and flat protection. Building on this solid base, the high-dampening T9 GRIPTON compound rebounds slowly to grip and stick to the ground for total traction and control. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40 approximate weight 1350g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T9.

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside, and the center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. It's the perfect choice for your gravity excursions—one ride and you'll be hooked. Building on this solid base, the high-dampening T9 Gripton compound rebounds slowly to grip and stick to the ground for total traction and control. - Casing: 60tpi light yet tough with additional bead to bead protection for exceptional durability, sidewall stiffness, and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T9 - 29 x 2.3", psi 25-50, approximate weight 975g - 29 x 2.6", psi 20-40, approximate weight 1050g

The world’s fastest riders are always hungry for more traction. So when Loïc Bruni, Finn Iles, and Chris Grice from the Gravity team reached out to us to develop a mountain bike tire to tame World Cup Downhill tracks, we cooked up something that will satisfy even the most aggressive appetites. We completely redesigned the Cannibal tread pattern, integrating our super-sticky GRIPTON T9 compound with a high-volume casing that brings superior control to any terrain. Staggered shoulder blocks maximize cornering stability, and large center braking blocks bite aggressively into the ground. Engineered to the design specifications of our riders, the Cannibal balances weight and durability with GRID Gravity casing for Enduro, Downhill, and Park riding. The Cannibal delivers the unbeatable combination of grip, confidence, and control to devour any track. - High-volume casing and staggered shoulder blocks for predictable high-speed cornering. - Re-designed center knobs and siping form strong surface connections. - Wide braking edges and massive center blocks cut in for maximum deceleration. - GRIPTON T9 compound reduces terrain-induced chatter, enhancing confidence at warp speeds. - Compliant and adaptable GRID GRAVITY 2-ply casing construction is ideal for Enduro, Park, and Downhill riding. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures.

Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast-rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability, and cornering traction. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40, approximate weight 1400g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T7/T9.

The Eliminator GRID TRAIL 2Bliss Ready T9 tire features a tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator extremely predictable on soft to hardpack trails. It's perfect for enduro and E-bikes where versatility and confidence are key. Our GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures, all while increasing pinch flat protection by 15% and puncture protection by 30%. Building on this solid base, the high-dampening GRIPTON T9 compound rebounds slowly to grip and stick to the ground for total traction and control. - 29 x 2.3, psi 25-50, approximate weight 975g - 29 x 2.6, psi 20-40, approximate weight 1050g - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Casing: 60tpi tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability. - Compound: GRIPTON T9

The Fast Trak GRID 2Bliss Ready T7 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7 - 29 x 2.2", PSI 25-50, approximate weight 730g - 29 x 2.35", PSI 25-50, approximate weight 800g

The Ground Control Control 2Bliss Ready T5 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5 - 29 x 2.2", PSI 25-50, approximate weight 800g - 29 x 2.35", PSI 25-50, approximate weight 845g

The Ground Control Grid 2Bliss Ready T7 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - 27.5 x 2.35", PSI 25-50, approximate weight 800g. - 27.5 x 2.6", PSI 25-50, approximate weight 850g. - 27.5 x 3.0", PSI 25-50, approximate weight 1050g. - 29 x 2.2", PSI 25-50, approximate weight 820g. - 29 x 2.35", PSI 25-50, approximate weight 845g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Compound: GRIPTON T7.

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - T7 Balanced grip and rolling compound. - GRID Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Tubeless Ready. - GRID 27.5x2.4' T7, psi 25-50, approximate weight 870g. - GRID 29x2.4' T7, psi 25-50, approximate weight 925g.

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - T9 Balanced grip and rolling compound. - GRID Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Tubeless Ready.

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - Compound: T7 for balanced speed and rolling efficiency. - Tubeless Ready. - GRID Trail 27.5x2.4' T7, psi 25-50, approximate weight 915g. - GRID Trail 29x2.4' T7, psi 25-50, approximate weight 980g.

The S-Works Fast Trak 2Bliss Ready T5/T7 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The S-Works casing is our lightest and most supple construction, shaving every gram possible from rotational weight. To top off this premium build the T5/T7 dual compound uses T5 center knobs for minimal rolling resistance and T7 shoulder knobs for extra cornering grip. - Casing: 120 TPI, lightest and most supple XC race construction - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5/T7 - 29 x 2.2", PSI 25-50, approximate weight 575g - 29 x 2.35", PSI 25-50, approximate weight 615g

The S-Works Renegade 2Bliss Ready T5/T7 is perfect for fast accelerations, climbing in hard-pack terrain and podium finishes. Our fastest-rolling cross-country tread receives an elevated shoulder height to confidently carry speed through turns. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The S-Works casing is our lightest and most supple construction, shaving every gram possible from rotational weight. To top off this premium build, the T5/T7 dual compound uses T5 center knobs for minimal rolling resistance and T7 shoulder knobs for extra cornering grip. - Casing: 120 TPI, lightest and most supple XC race construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5/T7 - 29 x 2.35", PSI 25-50, approximate weight 590g

Panaracer Romero Super Tough tire utilizes a triple compound and our Anti-Flat Plus technology that combines bead-to-bead protection with a rubber belt for added protection at low pressure. - 60 TPI DH/Enduro version utilizes a triple compound and Anti-Flat Plus technology that combines bead-to-bead protection with a rubber Bead Armor for added protection at low pressure

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

High-volume casing, low-profile tread - Aggressive side knobs - Dual Compound - Lightweight XC race tire - Race-inspired low profile design Maxxis has done it again with its latest XC race tire. The new Maxxis Aspen pushes the limits of a lightweight XC tire designed to have minimal rolling resistance. The Aspen is designed with a high-volume casing to smooth out the roughest roots and rocks, while the dual compounds give optimal traction in the corners. So, if crossing the finish line first is your top priority, then the Aspen was designed for you.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

After gathering years of data and feedback from our World Cup Downhill and Enduro World Series athletes, the Shorty was redesigned in 2021. The knob layout has been altered to improve wet traction, cornering performance, and mud shedding abilities. The narrower 2.40? casing improves frame and fork clearance for when things get really sloppy and reduces weight.

The Booster is a World Cup proven XC race tire that is aggressive enough to push traction to new limits. On top of that, it is also one of the fastest and lightest XC tires on the market. You no longer want to choose between a XC tire that is either fast and light, or provides great traction? The all new Booster combines the best of both worlds. - Modern and aggressive look, optimized for fast rolling and best in class cornering traction - The Booster utilizes a newly developed race compound that is fast and grippy, especially on dry, loose over hard and rough and rocky terrain - Front and Rear application - Sidewall Casing Technology (SCT) is the optimization of existing Kenda tire construction technologies, allowing for a tire to maximize the benefits of fluid based sealants while also increasing the strength of sidewalls for resistance to slices and abrasion

- A capable trail tire available in a wide range of sizes for any region, the Escape offers versatile off-road performance in all conditions. - Widely-spaced and carefully siped square knobs generate edge-to-edge grip, sophisticated rubber compounds ensure traction across a broad range of terrain, and durable casings offer security wherever the trail may lead.