Handlebars

- Unidirectional carbon fiber riser bar with 35mm stem clamp area - Downhill strength with 25% weight savings compared to aluminum

- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg

For XC racing, stiffness equals speed. That’s what drove our thinking when building the Roval Control SL handlebar. Borrowing inspiration from trail bike tech, we knew a 35mm bar clamp width would give us the rigidity our athletes demanded, and function as the backbone for our ultra-light, hand laid up carbon. It’s light… Like, 185 grams light. But, light-weight and stiffness aren’t the only pieces of the puzzle. Riders also need high-precision control while descending, and a comfortable, sustainable position on grueling climbs. The Roval Control SL’s 780mm width allows you to dial in your perfect size, and it’s World Championship proven geometry gives the confidence to attack any segment. - Material: High modulus carbon fiber - Width: 780mm, includes cut marks to customize width - Rise: 0mm or 20mm - Upsweep: 6 degrees - Backsweep: 8 degrees - Clamp Diameter: 35mm - Weight: 185g

Upgrade your bike with FSA's Omega Road Handlebar. The double-butted, tapered and shot-peened aluminum construction makes this bar light and durable. It also features an ergonomic curve for comfort and a variety of hand positions. Plus, the Omega even sports a groove that makes cable routing easy.

XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

- 6061 Premium butted Aluminum, high-strength design. - Short reach for optimal brake/shift control. - Shallow Bend Drop: 125mm drop x 65mm reach

- Perfect townie bike bar or think of it as an inverted moustache bar - Rigid aluminum construction, compatible with MTB-style levers

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the S-Works Hover Carbon Handlebars to excel on both fronts. Starting with the construction, they're made from their FACT carbon fiber for a light overall weight, vibration absorption, and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop and bend that's extremely comfortable, while they also offer a 15mm rise to help accommodate a wide fit range. - FACT carbon construction offers an optimized blend of durability and light overall weight. - 15mm rise for additional rider fit range. - Shallow Bend Drop: 123mm Drop x 75mm Reach

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Expert Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. - 15mm rise for additional rider fit range. - Constructed from 2014 Premium Butted Aluminum for a high-strength design. - Shallow Bend Drop: 123mm drop x 75mm reach

With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 726g - Lever Compatibility: Mountain 22.2mm

An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep

- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos

The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

Stolen Roll bar features multi-butted 4130 chromoly, 19mm cross bar, and P2 post-production heat treatment for increased strength. - Bar Clamp Diameter (mm): 22.2mm - Color: Black - Material: Steel - Rise: 9.5-inch

The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty

The WCS Carbon Logic-E Rizer bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Rizer is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Rizer features Ritchey's proven WCS carbon technology in a 15mm-rise bar with a textured stem clamp area to reduce the risk of bar slippage. - Material: carbon fiber - Width: 780mm (cutting not recommended) - Rise: 15mm - Backsweep: 9° - Upsweep: 3° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 175g - Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing) - For proper assembly, stems with open faceplates are required, such as the Ritchey C220 Trail.

Built from a lifetime of riding and racing experiences and inspired by life itself, the latest generation of the Ritchey WCS Streem brings fully internal cable routing to this legendary handlebar. The Streem bar has long combined the performance and advantage of an aero bar with all-day comfort. A generous aero-formed top section provides sleek performance and ergonomic support. While its comfort is bolstered by the stress-relieving compact drop, ever so gentle back sweep, and slight drop flare, its increasing radius drops offer multiple hand positions. Now updated with the ability for fully internal cable routing, the new WCS Streem ups its advantages to fortify its position as the perfect choice for road racers and serious enthusiasts who demand performance without sacrificing comfort in the everlasting quest for great ride experiences. - Internal cable routing - Compatible with Shimano EW-RS910 junction box - Increasing radius drops - Material: triple-butted 6066 alloy - Bend style: compact - Top style: ergonomic - Drop: 128mm - Reach: 73mm - Drop flare: 2° - Back sweep: 5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Cable routing: full or partial internal - Clip-On compatibility: yes for all sizes except 380mm - Other features: Di2 cable internal routing—C260 compatible - Weight: 287g (42cm)

The 2X bar packs the material technology, strength, and weight you expect from a Ritchey bar with an additional +/-5mm of height adjustment. - Material: triple-butted 7050 alloy - Width: 740mm (with cutting marks*) - Rise: reversible +/- 5mm flat rise - Backsweep: 5° and 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g

Same proven Ritchey quality, performance, and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. The extra-wide grip area allows plenty of room for all components and remotes of choice. - Material: triple-butted 7050 alloy - Width: 800mm - Rise: 20 or 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 284g

A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike

The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

The Surly Truck Stop Handlebar combines the benefits of a drop bar with those of a riser bar. Offering a variety of hand positions for comfort over the long haul, it also features 30mm of rise for a more upright and relaxed riding position. With a clean aesthetic, it’s a great option for taller riders looking for more rise and for bikes with a low-cut steer tube. - Lightweight, aluminum construction - Available in various widths - 31.8mm clamp diameter

The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel. - Material: Cromoly steel - Clamp diameter: 31.8mm - Width: 780mm - Rise: 0mm - Sweep Angle: 11 degrees - Color: Clear Coat Silver and E.D. coated Black - Weight: 400g

In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black

Built upon the popular K-Wing ergonomics, this full carbon handlebar is designed for Adventure, Gravel, and Cyclocross. - Aerodynamic integrated Cable Routing (ACR) - Full carbon handlebar is designed for Adventure, Gravel and Cyclocross - Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics - Flared drops for better control and clearance when descending - Bar Clamp Diameter: 31.8mm - 115mm drop, 76mm reach - 12° outward bend - 10° forward angle - 25mm offset drops - 5mm rise - 205 grams (420mm)

Adventure handlebars from FSA are double butted, tapered, and shot-peened AL6061. - 31.8mm bar clamp diameter with 34 x 21 ergonomic oval section - 125mm drop, 80mm reach - 12° side flare

The DRV/AEROa is a high-performance aluminum aero drop bar featuring a truncated airfoil for aerodynamics, comfort and stiffness. The curve has been optimized for modern road levers. The innovative fit and ergonomics of the DRV system include a 7° ramp angle and a 4° flare in the drops, allowing a natural wrist angle for enhanced comfort and control. The DRiVe metric by Profile Design pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. What is your DRiVe? Gone are the days of simply measuring a drop bar by the standard reach, drop and width. Our DRiVe metric pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. - The DRiVe Metric: The DRiVe (Drop Reach Variant) position is measured via a 73° line beginning at the bar bore. The DRiVe metric pinpoints the line intersection with the drop. - DRiVe Reclaims Comfort, Power & Control: Modern drop bar designs are deeply tied to tradition. They are designed based on outdated road bike sizing rendering many of cycling intended hand positions unattainable when riding modern frame geometry. The ride positions that are the most powerful and allow for the most control have now shifted into virtually unattainable positions. DRiVe reclaims many of the ideal positions most critical to comfort, power, and control. - Fit Made Simple: To predict the DRiVe position of any given rider, we looked at an anthropological study focusing on the correlation among handbreadth, shoulder width, and height. By measuring your handbreadth we can easily identify a DRiVe that will be compatible with your body type. - Progressive Ergonomics: The tops and hoods complement the powerhouse DRiVe position and the Reach and DRiVe are progressively sized as the bar increases in width. This progressive sizing ensures the most powerful positions remain right where they are needed. - Weight: 315g (38cm) - Size: 36, 38, 40, 42, 44cm (center to center) - Reach: 70, 75, 80mm - Clamp Width: 100mm - Clamp Diameter: 31.8mm - Clip Compatible: Yes - Drop: 122mm, 136mm, 148mm - Drop Outsweep: 4° - Drive: 105mm, 120mm, 135mm - Internal Cable Routing: Yes (Mechanical / Di2) - Max Brake Lever Torque: 10Nm - Max Torque Clamping to Bar: 6Nm - Material: 6061-T6 AL