These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.
Braid-reinforced PVC hose is stronger than Prestacycle's original Black hose from a few years ago, and also twice flexible! Schrader Spin-on head accepts all Presacycle Head, new and old. 200 psi working pressure, 13 inches length. Uses standard 1/4" threads. Non-marring and resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -30° to +125°F. Fits all previous Prestaflator tools, o-ring included.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Klic Co2 head/cartridge adaptor replacement
MSW threaded CO2 Cartridges fit all MSW inflator heads as well as other manufacturer's inflators.
Planet Bike's 16-gram CO2 Cartridges are great replacement cartridges for your CO2 regulator. They are compatible with Planet Bike's Air Kiss, Red Zeppelin, Airship, and other manufacturers' inflators that use threaded cartridges.
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original lever, no problem, here's the replacement part to get you back up and running.
These compact, non-threaded 12-gram cartridges work with compatible CO2 inflators and pack easily into your seat bag.
These compact, non-threaded 16-gram cartridges work compatible CO2 inflators and pack easily into your seat bag.
Replacement hose kit for MSW AirLift floor pumps. - Smart head fits on both Presta and Schrader valves - Extra-long 48-inch hose - Barb-type hose connection
Giant's Control Blast 16-gram Threaded CO2 Cartridges are the replacement cartridges for Giant's Control Blast and other inflators that accept this type (CO2 inflators sold separately). • Foam-padded cartridge provides insulation
$11.99 - $16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Repair your Wayside Hybrid pump with the Blackburn replacement head kit.
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."
These compact, threaded 12-gram cartridges work with compatible CO2 inflators and pack easily into your seat bag.
These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.
Upgrade your heavy Brass or Steel coupler. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Less weight in your hand means you can focus more energy on your work. Coupler weight 31 grams, compare to around 100 grams for Brass or Steel. I/M (Industrial / Mechanical) standard sizing will also fit your existing I/M connectors. CNC machined with stainless steel bearings and a nice polished finish. Kit option includes coupler plus three male plugs and one female plug.
Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.
Planet Bike's Ozone ATB Comp Mini-Pump is a ride-saver. For easy pumping and fast fills, it boasts a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
- MSW threaded CO2 Cartridges fit all MSW inflator heads as well as non-MSW inflators - 38-gram threaded cartridges are sold individually
MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader. - Compact design for easy storage - Alloy construction for durability and lightweight - Press on for both Schrader and Presta valves - Compatible with all 3/8" threaded compressed air cartridges
Planet Bike's MicroPro Mini-Pump inflates tires fast and easy thanks to its locking T handle, aluminum barrel and thumblock head. It fits all valves and comes with a frame mount for easy carrying.
-High Volume Telescoping alloy barrels with high-pressure and high volume modes -Autohead fits Presta or Schrader valves without converting -Ergonomic T-handle for maximum pumping efficiency -Ultra compact design fits into many seat packs or jersey pockets -Includes mounting bracket -Rebuildable
Planet Bike's Ozone ATB AL Mini-Pump is a ride-saver. For easy pumping and fast fills, it boasts a sturdy aluminum barrel, a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.
Planet Bike's Red Zeppelin CO2 bike tire inflator features rugged metal construction and the Airflation control knob for reliable and accurate inflation. It accepts all sizes of threaded cartridges and the inflator head threads directly onto either Presta or Schrader valves without an adapter. It'll make quick work of roadside repairs. - Precision-machined body and head with Airflation Control 2.0TM knob for improved reliability and ease-of-use - Threads directly onto Presta or Schrader valve without adapter - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 48 x 40 x 25 mm - Weight: 56 grams
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Topeak's Peakini II is a powerful mini pump that's ideal for road and trail use. It sports a reversible head so you can pump both your Schrader and Presta valves with ease. And, its highly efficient, single action design and T-handle mean you'll be back out riding after a flat quicker than ever.
These 16-gram cartridges can be used with Genuine Innovations' Second Wind MTB, Ultraflate and Proflate models as well as other cupped inflators.