Parts & Accessories
Updated and more secure clothing clip for mounting CatEye safety lights.
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.
Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only
Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.
2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.
The strand of 23 LEDs keep a hammock, tent, or campsite lit at night. - Twilights are not one, but a string of 23 LED lights to show the way - Powered by 3 AAA batteries (Not included) - Over 72 hours of burn time - Includes carry case with Velcro closure - Length: 120 - Weight: 4oz
Replacement silicone rubber mounting strap, for use with the Hecto, Micro, and Macro LED lights.
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
Replacement mounting strap for the Strip Drive LED lights.
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Mini XL, Power XL, Super XL, Deca and Mega Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
- Versatile LED and accessories forward mount - Multiple mounting options - Composite matrix construction with aluminum arms - Bolts directly to stem faceplate - Includes mounting hardware. (Stem mount, 2x mount arm, 2x length 30MM/35MM length to match most stems, spacers, screw set) - Suitable for most Lezyne most E-Bike front light (Macro, Power, Power Pro, Micro, Hecto)
Need to replace a strap on the compact Vis 180 Pro taillight or the front mount of the Vis 360 Pro? This is a durable direct replacement that installs in seconds and can be cut to the preferred length.
Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.
Replacement seat post mount for the Tuck e-Bike Taillight. Secure design with non-slip strap ensures light is stationary even in rough, bumpy terrain. - Includes plastic wedge spacers to ensure Tuck mounts at optimum angle for premium visibility
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Vya redefines bike safety with smart, advanced features with an ultra-compact design. This innovative design allows you to mount the Vya Taillight to any GoPro interface attached to your bike rack. - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Utilizes third-party GoPro mount interfaces designed for bike racks - Compatible with Vya Pro Taillight and standard Vya Taillight - GoPro base mount not included
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Vya redefines bike safety with smart, advanced features and an ultra-compact design. Extra seat post mounts allow Vya to be switched between bikes in seconds – perfect for families and multiple bike owners. This versatile mount can be used with the horizontal position of the Vya Pro Taillight or the vertically mounted Vya. Features - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Vya Pro Taillight mounts in a horizontal orientation; flip mount down for the standard vertical style of the Vya taillight - Compatible with Vya Pro Taillight and standard Vya Taillight
Direct replacement for the mount on Taz lights. The simple but thoughtfully designed system cinches light to the bar to prevent movement in bumpy terrain. - Two different rubber mount pads included to achieve the perfect fit depending if the handlebar is standard or oversize - Includes strap and mounting hardware
Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.
The best taillight mounting solution available! Mount your Tuck e-Bike taillight on the seat rails, effectively placing the rear light on the highest (and most visible) part of the bike. Easily attaches to seat rails and has ball-and-socket adjustment to perfectly angle the rear light. - Compatible with Tuck e-Bike taillight
Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet. - Compatible with: Urban, Vis, Solite, Taz, GoBe
Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights
Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.
Light & Motion's 7.4v 2-cell Li-ion Battery is compact and lightweight to power your light without weighing you down. It slips into a jersey pocket or pack or attaches to your bike via the convenient integrated rubber strap.
The Mini L 1.5 Smart Charger charges the 2-, 3-, and 6-cell lithium-ion batteries for the Seca and Stella lights (sold separately). Pick up an extra to top off your battery at the office. Also compatible with older 9-cell lithium-ion batteries.
Light & Motion's 11.1v 3-cell Li-ion Battery is nice and small and it's lithium-ion technology means impressive run times, while its gossamer weight of only 180 grams means it's easy to carry in a pocket or packs. It also comes with a convenient mounting strap.
Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.
Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket
Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
This lightweight bicycle handlebar and accessory mount adapter allows for the perfect placement of your mirror, bell or light. Lightweight and sleek design prevents your handlebar from becoming too cluttered. - Made from hi-tech resin and aluminum alloy - Lightweight accessory holder for handlebar end - Ideally paired with a bell, light or mirror - Works with both road and MTB bars - Minimalist design that does not clutter your bike
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.
The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
Page 1 of 2 Next page